THE SHOW / THE MICROTECHNOLOGY INFORMATION PORTAL
15.02.2018
D - Outils-Accessoires-Mécanique
Face milling cutters Jongen UNI-MILL A20
These new tools convince by a high number of teeth, 8 effective cutting edges per milling insert and a very soft cutting manner, supported by an effectively positive rake angle.
The milling programme includes shank type mills to DIN 1835-B and shell type mills with close and regular pitch. Different versions of number of teeth allow an optimum tool choice for the required machining process.
The reversible milling inserts with 8 effective cutting edges have a highly positive chip breaker and are available in a precision sintered and a precision ground version. The axial depth of cut is max. 3,5mm.
The milling inserts are available in the following qualities:
- The carbide quality HC45, consisting of a very tough finest grain quality with power nitride coating, is preferred for the machining of steel.
- The carbide qualities HC30 and XC35, consisting of hard wearing and tough finest grain hard metal quality combined with power nitride coatings for stainless steel, duplex steel and hard-tomachine materials.
- The carbide quality HC20 consists of a very hard wearing fine grain carbide quality with a power nitride coating and is the best choice for cast iron materials.
The tools made of high-strength and tempered tool steel withstand the highest pressures, the nickel-coated surfaces increase resistance to reweldings and corrosion.
All tools are equipped with internal coolant passages.